clear timezone

Clears the time offset for the switch’s real-time clock from Coordinated Universal Time (UTC). UTC is also know as Greenwich Mean Time (GMT).

Syntax: clear timezone

Defaults: None.

Access: Enabled.

Examples: To return the switch’s real-time clock to UTC, type the following command:

DWS-1008# clear timezone success: change accepted.

See Also:

clear summertime

set summertime

set timedate

set timezone

show summertime

show timedate

show timezone

ping

Tests IP connectivity between a switch and another device. MSS sends an Internet Control Message Protocol (ICMP) echo packet to the specified device and listens for a reply packet.

Syntax: ping host [count num-packets] [dnf] [flood] [interval time] [size size] [source-ip ip-addr vlan-name]

host

IP address, MAC address, hostname, alias, or user to ping.

count num-packetsNumber of ping packets to send. You can specify from 0 through 2,147,483,647. If you enter 0, MSS pings continuously until you interrupt the command.

dnf

Enables the Do Not Fragment bit in the ping packet to prevent the packet

 

from being fragmented.

flood

Sends new ping packets as quickly as replies are received, or 100 times

 

per second, whichever is greater.

 

Note: Use the flood option sparingly. This option creates a lot of traffic and

 

can affect other traffic on the network.

D-Link DWS-1008 CLI Manual

85

Page 88
Image 88
D-Link dws-1008 manual Clear timezone, Ping, Dnf, Flood