D-Link dws-1008 manual Set radio-profile auto-tune power-lockdown

set radio-profile auto-tune power-lockdown

Locks down the current power settings on all radios in a radio profile. The power settings that are in effect when the command is entered are changed into statically configured power settings on the radios. RF Auto-Tuning of power is then disabled in the radio profile.

Syntax: set radio-profile name auto-tune power-lockdown

name Radio profile name.

Defaults: By default, when RF Auto-Tuning of power is enabled, power settings continue to be changed dynamically based on network conditions.

Access: Enabled.

Usage: To save this command and the static power configuration commands created when you enter this command, save the configuration.

Examples: The following command locks down the power settings for radios in radio profile rp2:

DWS-1008# set radio-profile rp2 auto-tunepower-lockdownsuccess: change accepted.

See Also:

•set {ap dap} radio auto-tune max-power

•set radio-profile auto-tune channel-lockdown

•set radio-profile auto-tune power-config

•set radio-profile auto-tune power-interval

•set radio-profile auto-tune power-ramp-interval

set radio-profile auto-tune power-ramp-interval

Changes the interval at which power is increased or decreased, in 1 dBm increments, on radios in a radio profile until the optimum power level calculated by RF Auto-Tuning is reached.

Syntax: set radio-profile name auto-tune power-ramp-interval seconds

name Radio profile name.

seconds Number of seconds MSS waits before increasing or decreasing radio power by another 1 dBm. You can specify from 1 to 65535.

D-Link DWS-1008 CLI Manual 340