D-Link dws-1008 manual Show sessions network session-id Output, Link DWS-1008 CLI Manual 265

show sessions network session-id Output

Field	Description
Local Id	Identifier for the session on this particular switch. (This is the session ID you specify when
	entering the show sessions network session-id command.)
Global Id	Unique session identifier within the network.
	Status of the session:
	• AUTH, ASSOC REQ—Client is being associated by the 802.1X protocol.
	• AUTH AND ASSOC—Client is being associated by the 802.1X protocol, and the user
	is being authenticated.
	• AUTHORIZING—User has been authenticated (for example, by the 802.1X protocol
	and an AAA method), and is entering AAA authorization.
	• AUTHORIZED—User has been authorized by an AAA method.
	• ACTIVE—User’s AAA attributes have been applied, and the user is active on the
	network.
State	• DEASSOCIATED—One of the following:
	• Wireless client has sent the switch a disassociate message.
	• User associated with one of the current switch’s access points has appeared at
	another switch in the network.
	• STATUS UPDATED—switch is receiving a final update from an access point about the
	user, who has roamed away.
	• WEB_AUTHING—User is being authenticated by WebAAA.
	• WIRED AUTH’ING—User is being authenticated by the 802.1X protocol on a wired
	authentication port.
	• KILLING—User’s session is being cleared, because of 802.1X authentication failure,
	entry of a clear command, or some other event.
SSID	Name of the SSID the user is on.
Port/Radio	Number of the port and radio through which the user is accessing this session.
MAC address	MAC address of the session user.
User Name	Name of the authenticated user of this session
IP Address	IP address of the session user.
Vlan Name	Name of the VLAN associated with the session.
Tag	System-wide supported VLAN tag type.
Session Start	Indicates when the session started.
Last Auth Time	Indicates when the most recent authentication of the session occurred.
Last Activity	Indicates when the last activity (transmission) occurred on the session.
Session Timeout	Assigned session timeout in seconds.
Idle Time-To-Live	Number of seconds the session can remain idle before MSS changes the session state
	to Disassociated.
	Authentication type used to log onto the network:
	• DOT1X
Login Type	• MAC
	• LAST-RESORT
	• WEB-PORTA
EAP Method	Extensible Authentication Protocol (EAP) type used to authenticate the session user, and
	the IP address of the authentication server.
Session statistics	Time the session statistics were last updated from the access point, in seconds since a
as updated from AP	fixed standard date and time.
Unicast packets in	Total number of unicast packets received from the user by the switch (64-bit counter).
Unicast bytes in	Total number of unicast bytes received from the user by the switch (64-bit counter).
Unicast packets out	Total number of unicast packets sent by the switch to the user (64-bit counter).

D-Link DWS-1008 CLI Manual 265