show {ap dap} status

Displays DWL-8220AP access point and radio status information.

Syntax: show ap status [terse] [port-list all [radio {1 2}]]

Syntax: show dap status [terse] [dap-num all [radio {1 2}]]

terse

Displays a brief line of essential status information for each AP.

 

port-list

List of ports connected to the DWL-8220AP access point(s) for which to display

 

 

status.

dap-num

Number of a Distributed AP for which to display status.

 

all

Shows status information for all directly attached DWL-8220AP access points

 

 

and all Distributed AP access points configured on the switch.

radio1

Shows status information for radio 1.

 

radio2

Shows status information for radio 2. (This option does not apply to single-radio

 

 

models.)

Defaults: None.

Access: Enabled.

Examples: The following command displays the status of a Distributed AP access point:

DWS-1008#show dap status 1

Dap: 1, IP-addr: 10.2.30.5 (vlan ‘vlan-corp’), AP model: DWL-8220AP,

manufacturer: D-Link, name: DAP01

fingerprint: b4:f9:2a:52:37:58:f4:d0:10:75:43:2f:45:c9:52:c3

====================================================

State: operational (not encrypted) CPU info: IBM:PPC speed=266666664 Hz version=405GPrid=0x29c15335347f1919 ram=33554432 s/n=0333703027 hw_rev=A3

Uptime: 18 hours, 36 minutes, 27 seconds

Radio 1 type: 802.11g, state: configure succeed [Enabled] (802.11b protect) operational channel: 1 operational power: 14 base mac: 00:0b:0e:00:d2:c0

bssid1: 00:0b:0e:00:d2:c0, ssid: public bssid2: 00:0b:0e:00:d2:c2, ssid: employee-net

bssid3: 00:0b:0e:00:d2:c4, ssid: mycorp-tkip

Radio 2 type: 802.11a, state: configure succeed [Enabled] operational channel: 64

operational power: 14 base mac: 00:0b:0e:00:d2:c1 bssid1: 00:0b:0e:00:d2:c1, ssid:

public bssid2: 00:0b:0e:00:d2:c3, ssid: employee-net bssid3: 00:0b:0e:00:d2:

D-Link DWS-1008 CLI Manual

408

Page 411
Image 411
D-Link dws-1008 manual Show ap dap status, Radio1, Radio2, DWS-1008#show dap status