show auto-tune neighbors

Displays the other D-Link access point and third-party 802.11 access points that a D-Link access point can hear.

Syntax: show auto-tune neighbors [ap mp-num[radio {1 2 all}]]

Syntax: show auto-tune neighbors [dap dap-num [radio {1 2 all}]]

mp-numAP port connected to the AP access point for which to display neighbors.

dap-numNumber of a Distributed AP for which to display neighbors.

radio1 Shows neighbor information for radio 1.

radio2 Shows neighbor information for radio 2.

radio all Shows neighbor information for both radios.

Defaults: None.

Access: Enabled.

Usage: For simplicity, this command displays a single entry for each D-Link radio, even if the radio is supporting multiple BSSIDs. However, BSSIDs for third-party 802.11 radios are listed separately, even if a radio is supporting more than one BSSID.

Information is displayed for a radio if the radio sends beacon frames or responds to probe requests. Even if a radio’s SSIDs are unadvertised, D-Link radios detect the empty beacon frames (beacon frames without SSIDs) sent by the radio, and include the radio in the neighbor list.

Examples: The following command displays neighbor information for radio 1 on the directly connected AP access point on port 2:

DWS-1008#show auto-tune neighbors ap 2 radio 1

Total number of entries for port 2 radio 1: 5

Channel

Neighbor BSS/MAC

RSSI

-----------

----------------------------

------

1

00:0b:85:06:e3:60

-46

1

00:0b:0e:00:0a:80

-78

1

00:0b:0e:00:d2:c0

-74

1

00:0b:85:06:dd:00

-50

1

00:0b:0e:00:05:c1

-72

D-Link DWS-1008 CLI Manual

414

Page 417
Image 417
D-Link dws-1008 manual Show auto-tune neighbors, DWS-1008#show auto-tune neighbors ap 2 radio