VLAN name or number. Entries are listed for only the specified VLAN.
Lists the number of static entries. A static entry does not age out, but is removed from the database after a reboot, reset, or power cycle.
Lists the number of dynamic entries. A dynamic entry is automatically removed through aging or after a reboot, reset, or power cycle.
Lists the number of permanent entries. A permanent entry does not age out and remains in the database even after a reboot, reset, or power cycle.

show fdb count

Lists the number of entries in the forwarding database.

Syntax: show fdb count {perm static dynamic} [vlan vlan-id] perm

static

dynamic

vlan vlan-id Defaults: None. Access: All.

Examples: The following command lists the number of dynamic entries that the forwarding database contains:

DWS-1008#show fdb count dynamic

Total Matching Entries = 2

See Also:

• show fdb

show security l2-restrict

Displays configuration information and statistics for Layer 2 forwarding restriction.

Syntax: show security l2-restrict [vlan vlan-id all]

vlan-idVLAN name or number.

all

Displays information for all VLANs.

Defaults: If you do not specify a VLAN name or all, information is displayed for all VLANs.

Access: Enabled.

D-Link DWS-1008 CLI Manual

70

Page 73
Image 73
D-Link dws-1008 manual Show fdb count, Show security l2-restrict, Vlan vlan-id Defaults None. Access All