D-Link dws-1008 manual Set radius proxy port, Defaults None Access Enabled

Access: Enabled.

Usage: AAA for third-party AP users has additional configuration requirements.

Examples: The following command configures a RADIUS proxy entry for a third-party AP RADIUS client at 10.20.20.9, sending RADIUS traffic to the default UDP ports 1812 and 1813 on the switch:

DWS-1008# set radius proxy client address 10.20.20.9 key radkey1 success: change accepted.

See Also:

•clear radius proxy client

•set authentication proxy

•set radius proxy port

set radius proxy port

Configures the switch port connected to a third-party AP as a RADIUS proxy for the SSID supported by the AP.

Syntax: set radius proxy port port-list[tag tag-value] ssid ssid-name

port port-list	Switch port(s) connected to the third-party AP.
tag tag-value	802.1Q tag value in packets sent by the third-party AP for the SSID.
ssid ssid-name	SSID supported by the third-party AP.
Defaults: None.
Access: Enabled.

Usage: AAA for third-party AP users has additional configuration requirements.

Enter a separate command for each SSID, and its tag value, you want the switch to support.

Examples: The following command maps SSID mycorp to packets received on port 3 or 4, using

802.1Q tag value 104:

DWS-1008# set radius proxy port 3-4 tag 104 ssid mycorp success: change accepted.

See Also:

•clear radius proxy port

•set authentication proxy

•set radius proxy client

D-Link DWS-1008 CLI Manual 235