The table below describes the fields in this display.

Field

Description

BSSID

MAC address of the SSID used by the detected device.

 

 

Vendor

Company that manufactures or sells the rogue device.

 

 

 

Classification of the rogue device:

 

rogue—Wireless device that is not supposed to be on the network. The device has an

 

entry in a switch’s FDB and is therefore on the network.

Type

intfr—Wireless device that is not part of your network but is not a rogue. The device

 

does not have an entry in a switch’s FDB and is not actually on the network, but might be

 

causing RF interference with AP radios.

 

known—Device that is a legitimate member of the network.

 

 

Port/Radio/Channel

Port number, radio number, and channel number of the radio that detected the rogue. For

a Distributed AP, the connection number is labeled dap. (This stands for distributed ap.)

 

 

 

 

Classification and encryption information for the rogue:

Flags

• The i, a, or u flag indicates the classification.

• The other flags indicate the encryption used by the rogue.

 

 

For flag definitions, see the key in the command output.

 

 

RSSI

Received signal strength indication (RSSI)—the strength of the RF signal detected by

the AP radio, in decibels referred to 1 milliwatt (dBm).

 

 

 

Age

Number of seconds since an AP radio last detected 802.11 packets from the device.

 

 

See Also:

• show rfdetect visible

show rfdetect ignore

Displays the BSSIDs of third-party devices that MSS ignores during RF scans. MSS does not generate log messages or traps for the devices in the ignore list.

Syntax: show rfdetect ignore

Defaults: None.

Access: Enabled.

Examples: The following example displays the list of ignored devices:

DWS-1008# show rfdetect ignore Total number of entries: 2 Ignore MAC

-----------------

aa:bb:cc:11:22:33

aa:bb:cc:44:55:66

See Also:

clear rfdetect ignore

set rfdetect ignore

D-Link DWS-1008 CLI Manual

281

Page 284
Image 284
D-Link dws-1008 Show rfdetect ignore, Show rfdetect visible, Syntax show rfdetect ignore Defaults None Access Enabled