set service-profile beacon

Disables or reenables beaconing of the SSID managed by the service profile.

An AP radio responds to an 802.11 probe any request with only the beaconed SSID(s). For a nonbeaconed SSID, radios respond only to directed 802.11 probe requests that match the nonbeaconed SSID’s SSID string.

When you disable beaconing for an SSID, the radio still sends beacon frames, but the SSID name in the frames is blank.

Syntax: set service-profile name beacon {enable disable}

name

Service profile name.

enable Enables beaconing of the SSID managed by the service profile.

disable Disables beaconing of the SSID managed by the service profile.

Defaults: Beaconing is enabled by default.

Access: Enabled.

Examples: The following command disables beaconing of the SSID managed by service profile sp2:

DWS-1008# set service-profile sp2 beacon disable success: change accepted.

See Also:

set radio-profile beacon-interval

set service-profile ssid-name

set service-profile ssid-type

show service-profile

set service-profile cac-mode

Configures the Call Admission Control (CAC) mode.

Syntax: set service-profile name cac-mode {none session}

D-Link DWS-1008 CLI Manual

362

Page 365
Image 365
D-Link dws-1008 manual Set service-profile beacon, Set service-profile cac-mode