![CUSTOMER RESPONSIBILITIES](/images/new-backgrounds/98901/9890121x1.webp)
CUSTOMER RESPONSIBILITIES
MAINTENANCE SCHEDULE
FILL IN DATES AS YOU COMPLETE
REGULAR SERVfCE
MAINTENANCE TASK
PRESSURE WASHER Check/clean water inletscreen on
Check high pressure hose.
Check detergent hose,
Check spray gun and assembly for leaks. Purge pump of air and contaminants.
ENGINE
Check oil level
Change engine oil.
Service air cleaner.
Clean/replace spark plug.
Prepare for storage.
HOURLY OPERATING INTERVAL SERVICE DATES
| Every 25 | Every 100 |
Before Each | Hours or | Hours or |
Use | Yeady | Yearly |
xt
x
x
x
x
x
x*
x**
x
Prepare unitfor storage if it is to remain]drefor longerthan 30 days.
tClean if clogged. Replace if perforated or tom.
• Change oil after first 2 hours then 25 thereafter. Change sooner when under dirty or dusty conditions.
"Clean more often under dirty or dusty conditions.
GENERAL RECOMMENDATIONS
The warranty of the high pressure washer does not cover items that have been subjected to operator abuse or neg- ligence. To receive full value from the warranty, operator
must maintain high pressure washer as instructed in this manual.
Some adjustments will need to be made periodically to properly maintain your high pressure washer.
All adjustments in the Service and Adjustments section of this manual should be made at least once each season.
Once a year you should clean or replace the spark plug and clean or replace the air filter and check the gun and wand assembly for wear. A new spark plug and clean air filter assure proper fuekair mixture and help your engine run better and last longer.
PRODUCT SPECIFICATIONS
Pressure Washer Specifications
PRESSURE | 2000 psi |
|
FLOW RATE | 2.2 GPM |
|
.DETERGENT M X | Use undiluted | deterqent |
WATER SUPPLY |
|
|
TEMPERATURE | Not to Exceed | 140°F |
Engine Specifications
ENGINE | MODEL | HONDA |
RATED | HORSEPOWER | 5.0 |
DISPLACEMENT | 160cc | |
SPARK | PLUG: Type: | NGK: BPR6ES |
|
| or equivalent |
| Set Gap to: | |
|
| |
GASOLINE CAPACITY | 1.8 U.S. quart | |
OIL |
| SAE |
SOLID | STATE IGNITION | 0.0125 inch |
AIR GAP
In the State of California a spark arrestor is required by law (Section 4442 of the Califomia Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands.
Note: if you equip the engine of your pressure washer with a spark arrestor muffler, the spark arrestor must be maintained in effective working order by the owner/operator.
You can order a spark arrestor through your Sears Service Center.
1!