HOW TO SET UP YOUR PRESSURE WASHER (continued)
•Cut the fie wraps on the High Pressure Hose and connect to Spray Gun. Tighten by hand.
•Remove plastic cap and connect High Pressure Hose to Pump. Tighten by hand.
Attach High
Pressure
Hose here
Attach nozzle extension to spray gun.
Attach adjustable nozzle to the nozzle extension.
•Place assembled spray gun on holder.
•Place turbo nozzle in grommet hole in base.
PRE-OPERATIONAL CHECKLIST
Before you operate your new high pressure washer please review the following items:
•All assembly instructionshave been completed.
•The high pressure hose connections to the spray gun and to the pump are tight and secure.
•Engine oil is at proper level
Important: Any attempt to crank or start the engine before it has been serviced with the recommended oil
may result in an engine failure. See Page 9 for basic instructions on adding oil and proper oil specifications for your high pressure washer.
•Be sure gas tank is filled properly with clean, fresh, unleaded gasoline.
•Become familiar with all controls - their location and function. Operate those controls before starting the engine.
Important: The water supply to your high pressure washer must be connected and turned on prior to starting your engine.
.5
