Field

Description

Bridge ID Priority

This switch’s bridge priority.

 

 

Bridge Max Age

This switch’s maximum acceptable age for hello packets.

 

 

Bridge Hello Time

This switch’s hello interval.

 

 

Bridge Forward Delay

This switch’s forwarding delay value.

 

 

 

Port number.

Port

Note: Only network ports are listed. STP does not apply to access point ports or wired

 

authentication ports.

 

 

Vlan

VLAN ID.

 

 

 

STP state of the port:

 

Blocking—The port is not forwarding Layer 2 traffic but is listening to and forwarding

 

STP control traffic.

 

Disabled—This state can indicate any of the following conditions:

 

• The port is inactive.

 

• The port is disabled.

 

• STP is enabled on the port but the port is not forwarding traffic. (The port is active

STP-State or Port-State

and enabled but STP has just started to come up.)

 

Forwarding—The port is forwarding Layer 2 traffic.

 

Learning—The port is learning the locations of other devices in the spanning tree

 

before changing state to forwarding.

 

Listening—The port is comparing its own STP information with information in STP

 

control packets received by the port to compute the spanning tree and change state

 

to blocking or forwarding.

 

• STP Off—STP is disabled on the port.

 

 

Cost

STP cost of the port.

 

 

Prio

STP priority of the port.

 

 

 

State of the uplink fast convergence feature:

Portfast

• Enabled

 

• Disabled

 

 

See Also:

• show spantree blockedports

D-Link DWS-1008 CLI Manual

441

Page 444
Image 444
D-Link dws-1008 manual Show spantree blockedports Link DWS-1008 CLI Manual 441, Vlan ID