Denies authentication and prohibits the user from accessing the SSID.
Note: The fallthru authentication type none is different from the authentication method none you can specify for administrative access.The fallthru authentication type none denies access to a network user. In contrast, the authentication method none allows access to the DWS-1008 by an administrator.
Serves the user a web page from the DWS-1008’s nonvolatile storage for secure login to the network.
Automatically authenticates the user and allows access to the SSID requested by the user, without requiring a username and password.

set service-profile auth-fallthru

Specifies the authentication type for users who do not match an 802.1X or MAC authentication rule for an SSID managed by the service profile. When a user tries to associate with an SSID, MSS checks the authentication rules for that SSID for a userglob that matches the username. If the SSID does not have an authentication rule that matches the username, authentication for the user falls through to the fallthru type.

The fallthru type is a service profile parameter, and applies to all radios within the radio profiles that are mapped to the service profile.

Syntax: set service-profile name auth-fallthru {last-resort none web-portal} last-resort

none

web-portal

Defaults: The default fallthru authentication type is none.

If a username does not match a userglob in an authentication rule for the SSID requested by the user, the DWS-1008 that is managing the radio the user is connected to redirects the user to a web page located on the DWS-1008. The user must type a valid username and password on the web page to access the SSID.

Access: Enabled.

Usage The last-resortfallthru authentication type allows any user to access any SSID managed by the service profile. This method does not require the user to provide a username or password. Use the last-resortmethod only if none of the SSIDs managed by the service profile require secure access.

The web-portal authentication type also requires additional configuration items.

Examples: The following command sets the fallthru authentication type for SSIDS managed by

D-Link DWS-1008 CLI Manual

360

Page 363
Image 363
D-Link dws-1008 manual Set service-profile auth-fallthru