D-Link dws-1008 manual Set service-profile cipher-ccmp, Enables Ccmp encryption for WPA clients

Examples: The following command changes the maximum number of sessions for radios used by service profile sp1 to 10:

DWS-1008# set service-profile sp1 cac-session 10 success: change accepted.

See Also:

•set service-profile cac-mode

•show service-profile

set service-profile cipher-ccmp

Enables Counter with Cipher Block Chaining Message Authentication Code Protocol (CCMP) encryption with WPA clients, for a service profile.

Syntax: set service-profile name cipher-ccmp {enable disable}

name	Service profile name.
enable	Enables CCMP encryption for WPA clients.
disable	Disables CCMP encryption for WPA clients.

Defaults: CCMP encryption is disabled by default.

Access: Enabled.

Usage: To use CCMP, you must also enable the WPA IE.

Examples: The following command configures service profile sp2 to use CCMP encryption:

DWS-1008# set service-profile sp2 cipher-ccmp enable success: change accepted.

See Also:

•set service-profile cipher-tkip

•set service-profile cipher-wep104

•set service-profile cipher-wep40

•set service-profile wpa-ie

•show service-profile

D-Link DWS-1008 CLI Manual 364