| To sew |
c | c Fold back the left seam allowance. Turn the right |
q | seam allowance under to form a 0.2 to 0.3 cm (1/8˝) |
fold. Place the zipper teeth next to the fold and pin it | |
| in place. |
| Set the stitch length and thread tension back to the |
| original setting. |
| q Lower fabric |
e | w 0.2 to 0.3 cm (1/8˝) fold |
| e End of the opening |
| r Opening size |
w |
|
| r |
v
vAttach zipper foot E with the pin on the right hand side.
Lower the foot onto the topside at the bottom of the zipper so that the needle pierces the fabric next to the fold and the zipper tape.
Sew along the zipper guiding the zipper teeth along the bottom edge of the foot.
b | b Sew through all layers next to the fold. |
| Stop 5 cm (2˝)t before zipper foot E reaches the slider |
| on the zipper tape. |
| Lower the needle slightly into the fabric. |
| Raise the foot and open the zipper. Lower the foot |
| and stitch the remainder of the seam. |
y | t 5 cm (2˝) |
| y Slider |
t
5 1
