Basting
|
|
| Machine settings |
| |
q | w | e | q Pattern: | 7 (mode 1) | |
w Presser foot: | Darning foot P | ||||
|
|
| |||
| 7 |
| e Thread tension: | ||
|
|
|
| ||
|
|
| * Feed dog: | Dropped | |
The basting stitch is used to hold fabric layers together during fitting.
Attaching the darning foot P
Loosen the thumbscrew and remove the foot holder. Attach the darning foot P to the presser bar putting the pin
won the needle clamp screw.
Tighten the thumbscrew firmly with the screwdriver.
q Thumbscrew w Pin
e Needle clamp screw
e
q
To sew:
Lower the feed dog.
Draw the both needle and bobbin thread to the back. Depress the foot control. The machine will sew one stitch and stop automatically.
Release the foot control.
Hold the fabric taut and slide it to where you want to sew the next stitch.
CAUTION:
Do not pull the fabric while stitching. It may deflect the needle causing it to break.
3 0
