Janome 4900 QC manual Built-in needle threader

Built-in needle threader

NOTE:

The needle threader can be used with a #11 to #16

zneedle, or a #11 Blue needle.

Thread size 50 to 90 is recommended.

		z Raise the presser foot. Raise the needle to its highest
		position. Push down the needle threader knob q as
		far as it will go.
		The hook comes out through the needle eye from
		behind.
		q Knob
	q	w Hook
x		w

x Draw the thread around the guide and under the hook w.

w

c	c Release the knob slowly while holding the thread
	end with your hand.

q

v	v A loop of the thread is pulled up through the needle
	eye.

2 2