⁄1
e
⁄2t
t
⁄3
y
t
⁄4
y
⁄5
y
⁄1The patch should be cut 1 to 1.5 cm (7/16˝ – 10/16˝) away from the hole. The corners should be cut rounded off as shown.
re Right side of patch
r Wrong side of garment fabric
⁄2Place the facing on the wrong side of the garment fabric. Mark the 4 corners with pins as shown.
yt Facing
y Garment fabric
⁄3Turn all the layers over and cut the buttonhole opening on the facing in the same way as step c.
Four marker pins show you the corner points on the facing. Fold back each flap between the facing and patch.
tFacing
yGarment fabric
⁄4Stitch around the opening with a needle and thread as shown.
tFacing
yGarment fabric
⁄5Welted buttonhole is complete.
yGarment fabric
4 8
