q | w | e |
| 26 |
|
q | w |
| |
| e |
| r |
| t |
z |
|
c
v | x |
b |
|
n |
|
Twin needle sewing
Machine settings |
|
q Pattern: | 26 (example) |
wPresser foot: Satin stitch foot F e Thread tension: AUTO
NOTES:
*When you sew patterns with the twin needle, press the twin needle button 
and test the stitches first before you begin to sew.
*Use the zigzag foot A or satin stitch foot F for twin needle sewing.
*Turn off the machine before changing the needle.
*Use #60 or finer threads for twin needle sewing.
Use the additional spool pin and spool stand.
Turn on the power switch and press the twin needle button
. Select a pattern and sew.
* The stitch width is limited to 3 mm or less.
qSpool
wAdditional spool pin e Felt
r Spool stand
t Hole for additional spool pin
Threading the machine for twin needle sewing Place two spools of thread on the spool stand. Draw both threads from the spools and thread them through the points from z to n.
Make sure that the two strands of thread do not get tangled.
Slip one of the threads in the needle bar thread guide on the left, and the other on the right.
Thread the needles from the front to back with your hand.
NOTES:
Threading from z to v is the same as for a single needle. The automatic needle threader cannot be used for the twin needle.
NOTE:
If you select a pattern not suitable for twin needle sewing, the LCD screen will show a warning message.
6 4
