q | w | e |
| 1 |
|
0.5 cm
0.8 cm
q | w | e |
| 32 |
|
q
Rolled hem
Machine settings |
|
q Pattern: | 1 (mode 1) |
w Presser foot: | Hemmer foot D |
e Thread tension: | AUTO |
To sew:
Fold the edge of the fabric twice, 6 cm (2 3/8˝) in length and 0.3 cm (1/8˝) in width.
Trim the corner 0.5 cm (3/16˝) by 0.8 cm (1/4˝) for easier insertion of the hem into the foot.
Position the fabric aligning the edge of hem with the guide on the foot.
Lower the foot and sew
Stop the machine with the needle down in the fabric. Raise the foot and insert the folded portion of the fabric into the curl of the foot.
Lower the foot, and then sew by lifting up the edge of the fabric to keep it feeding smoothly and evenly.
Cording
Machine settings |
|
q Pattern: | 32 (mode 2) |
w Presser foot: | Cording foot H |
e Thread tension: | AUTO |
Attach the cording foot H |
|
3-strand cording
Insert 3 strands of cording under the spring of the foot and draw them under the foot to the rear.
Hold the three strands parallel for even sewing and be sure to sew over the strands
Stitch slowly and smoothly, guiding the fabric as you sew.
qSpring
Insert 1 strand of cording under the spring of the foot and draw it under the foot to the rear (use the center slot of the spring).
Select pattern 8 (mode 1), then decrease the stitch width and sew.
6 2
