qw
w
q
q
e w
Button sewing
Machine settings
e | q Pattern: | 27 (mode 2) | |
|
| w Presser foot: | Button sewing foot T |
|
| ||
|
| e Thread tension: | AUTO |
|
| ||
* Lower the feed dog (see page 14)
Attaching the button sewing foot T
Insert the rear pin on the foot into the groove of the foot holder.
Gently lower the presser foot lifter while holding the foot with your fingers.
q Rear pin
w Groove of the foot holder.
To sew
zPlace a button on the fabric and lower the needle by turning the handwheel with your hand, so that the needle enters through the left hole in the button.
xAlign the direction of button and lower the button sewing foot T to hold the button in place.
cPress the up/down needle button to bring the needle up to the highest position. Adjust the stitch width, so that the zigzag width matches the span of holes in the button.
vPress the start/stop button to sew and the machine will stop automatically.
bCut the needle thread at the beginning. q Needle thread at the beginning
nPull the bobbin thread to pull the needle thread to the wrong side off the fabric.
w Needle thread e Bobbin thread
m Tie both threads together.
* Raise the feed dog after sewing.
3 7
