q | w | Darning |
|
| 28 | Machine settings |
|
| q Pattern: | 28 (mode 2) | |
|
| ||
| e | w Presser foot: | Automatic buttonhole foot R |
|
| e Thread tension: | AUTO |
z Pull the button holder to the rear as far as it will go. q Button holder
x Place the garment under the foot.
Press the up/down needle position button twice. Remove the fabric to the left to draw both threads under the foot and place the fabric back under the foot.
c Lower the needle at the starting point, then lower the foot.
w Starting point
v Depress the foot control and the machine will sew a
darning 2 cm (3/4˝) long and stop automatically.
Repeat sewing in a different direction until the darning covers the rip or hole.
q
NOTE:
The maximum size of darning is 2 cm (3/4˝) long and 0.7 cm (1/4˝) wide.
we Maximum length 2 cm (3/4˝) r Maximum width 0.7 cm (1/4˝) t Starting point
e
r
w
5 3
