SETTING THE CLOCK |
| RADIO OPERATION |
To turn the unit on |
| |
You can turn the unit on by pressing any | 1 Press FUNCTION repeatedly to select | |
button on the front panel except OPEN and | ||
the band from among F1 (FM1), F2 | ||
the Jog Dial. | ||
(FM2), F3 (FM3), A1 (AM1) and A2 (AM2). | ||
| ||
| The band indications appear cyclically in |
1 With the unit on, press and hold SELECT | order. |
|
for more than 2 seconds until the clock | • F1, F2 and F3 share the same frequency | |
indication appears. | range. |
|
| • A1 and A2 share the same frequency range. | |
| Band | Frequency |
| indication | indication |
2 Press TUNE i, then rotate the Jog Dial to set the hour.
Press TUNE k, then rotate the Jog Dial to set the minute.
Rotate the Jog Dial clockwise to go forward.
Rotate the Jog Dial counterclockwise to go backward.
3 Press SELECT.
The clock starts working from 0 second.
To have the clock displayed when the unit is on
Press DISP. To return the unit to its former display, press DISP repeatedly.
2 Press (and hold for more than 2 seconds) either TUNE i or TUNE k to tune in the desired station.
The unit starts scanning and tunes in a station automatically (seek tuning).
Press TUNE i to increase and TUNE k to decrease the frequency.
Press the button again to cancel seek tuning. Repeat the procedure until the desired station is tuned in.
Note
If you press (for less than 0.5 second at a time) either TUNE ior TUNE k, the frequency increases or decreases step by step.
3 Adjust the volume with the Jog Dial.
