D-Link dws-1008 manual Creates a new boot profile, Syntax create

create

Creates a new boot profile.

Syntax: create

Defaults: The new boot profile has the same settings as the currently active boot profile by default.

Access: Boot prompt.

Usage: A DWS-1008 switch can have up to four boot profiles. The boot profiles are stored in slots, numbered 0 through 3. When you create a new profile, the system uses the next available slot for the profile. If all four slots already contain profiles and you try to create a fifth profile, the switch displays a message advising you to change one of the existing profiles instead.

To make a new boot profile the currently active boot profile, use the next command. To change boot parameter settings, use the change command.

Examples: The following command creates a new boot profile in slot 1 on a switch that currently has only one boot profile, in slot 0:

boot> create BOOT Index: 1 BOOT TYPE: c DEVICE: boot1: FILENAME: default FLAGS: 00000000 OPTIONS: run=nos;boot=0

See Also:

•change

•delete

•next

•show

D-Link DWS-1008 CLI Manual 517