acl-name

Security ACL name. ACL names must be unique within the switch, must start

 

with a letter, and are case-insensitive. Specify an ACL name of up to 32 of the

 

following characters:

 

• Letters a through z and A through Z

 

• Numbers 0 through 9

 

• Hyphen (-), underscore (_), and period (.)

 

D-Link recommends that you do not use the same name with different

 

capitalizations for ACLs. For example, do not configure two separate ACLs

 

with the names acl_123 and ACL_123.

 

Note: In an ACL name, do not include the term all, default-action, map, help,

 

or editbuffer.

permit

Allows traffic that matches the conditions in the ACE.

cos cos

For permitted packets, a class-of-service (CoS) level for packet handling.

 

Specify a value from 0 through 7:

 

• 1 or 2—Background. Packets are queued in AP forwarding queue 4.

 

• 0 or 3—Best effort. Packets are queued in AP forwarding queue 3.

 

• 4 or 5—Video. Packets are queued in AP forwarding queue 2. Use CoS

 

level 4 or 5 for voice over IP (VoIP) packets other than SpectraLink

 

Voice Priority (SVP).

 

• 6 or 7—Voice. Packets are queued in AP forwarding queue 1. Use 6 or

 

7 only for VoIP phones that use SVP, not for other types of traffic.

deny

Blocks traffic that matches the conditions in the ACE.

protocol

IP protocol by which to filter packets:

 

• ip

 

• tcp

 

• udp

 

• icmp

 

• A protocol number between 0 and 255

D-Link DWS-1008 CLI Manual

476

Page 479
Image 479
D-Link dws-1008 manual Permit, Cos cos, Deny