D-Link dws-1008 manual Set ip https server

Defaults: None.

Access: Enabled.

Usage: You can configure a switch to use one primary DNS server and up to five secondary DNS servers.

Examples: The following commands configure a switch to use a primary DNS server and two secondary DNS servers:

DWS-1008# set ip dns server 10.10.10.50/24 primary success: change accepted.

DWS-1008# set ip dns server 10.10.20.69/24 secondary success: change accepted.

DWS-1008# set ip dns server 10.10.30.69/24 secondary success: change accepted.

See Also:

•clear ip dns domain

•clear ip dns server

•set ip dns

•set ip dns domain

•show ip dns

set ip https server

Enables the HTTPS server on a DWS-1008 switch. The HTTPS server is required for Web View access to the switch.

Caution: If you disable the HTTPS server, Web View access to the switch is disabled.

Syntax: set ip https server {enable disable}

enable Enables the HTTPS server.

disable Disables the HTTPS server.

Defaults: The HTTPS server is disabled by default.

Access: Enabled.

Examples: The following command enables the HTTPS server on a switch:

DWS-1008# set ip https server enable success: change accepted.

D-Link DWS-1008 CLI Manual 128