set prompt

Changes the CLI prompt for the DWS-1008 switch to a string you specify.

Syntax: set prompt string

string

Alphanumeric string up to 32 characters long. To include spaces in the

 

prompt, you must enclose the string in double quotation marks (“”).

Defaults: The factory default for the DWS switch prompt is DWS-mm-nnnnnn, where

mmis the model number and nnnnnn is the last 6 digits of the 12-digit system MAC address.

Access: Enabled.

Usage: When you first log in for the initial configuration of the DWS switch, the

CLI provides an DWS-mmmm-nnnnnn> prompt. After you become enabled by typing enable and giving a suitable password, the DWS-mmmm-nnnnnn#prompt is displayed.

If you use the set system name command to change the default system name, MSS uses that name in the prompt, unless you also change the prompt with set prompt.

Examples: The following example sets the prompt from DWS to happy_days:

DWS-1008# set prompt happy_days success: change accepted. happy_days#

See Also:

clear prompt

set system name

show config

D-Link DWS-1008 CLI Manual

22

Page 25
Image 25
D-Link dws-1008 manual Set prompt, Syntax set prompt string