test

Displays or changes the state of the poweron test flag. The poweron test flag controls whether an performs a set of self tests prior to the boot process.

Syntax: test [ON on OFF off]

ON Enables the poweron test flag.

on Same effect as ON.

OFF Disables the poweron test flag.

off Same effect as OFF.

Defaults: The poweron test flag is disabled by default.

Access: Boot prompt.

Examples: The following command displays the current setting of the poweron test flag:

boot> test

The diagnostic execution flag is not set.

See Also:

• boot

version

Displays version information for a switch’s hardware and boot code.

Syntax: version

Defaults: None.

Access: Boot prompt.

Usage: This command does not list the system image file versions installed in the boot partitions. To display system image file versions, use the dir or fver command.

D-Link DWS-1008 CLI Manual

527

Page 530
Image 530
D-Link dws-1008 manual Test, Version, Syntax test on on OFF off, Syntax version Defaults None