D-Link dws-1008 manual Link DWS-1008 CLI Manual 422

Field		Description
	Minimum length (in bytes) a frame can be for a radio in the radio profile to use
RTS Threshold	the RTS/CTS method to send the frame. The RTS/CTS method clears the air
	of other traffic to avoid corruption of the frame due to a collision with another
	frame.
Frag Threshold	Maximum length (in bytes) a frame is allowed to be without being fragmented
	into multiple frames before transmission by a radio in the radio profile.
	Indicates whether an 802.11b radio that uses this radio profile advertises support
	for frames with long preambles only:
Long Preamble
	• YES—Advertises support for long preambles only.
	• NO—Advertises support for long and short preambles.
Tune Channel	Indicates whether RF Auto-Tuning is enabled for dynamically setting and tuning
	channels.
Tune Power	Indicates whether RF Auto-Tuning is enabled for dynamically setting and tuning
	power levels.
	Interval, in seconds, at which RF Auto-Tuning decides whether to change the
Tune Channel Interval	channels on radios in a radio profile. At the end of each interval, MSS processes
	the results of the RF scans performed
	during the previous interval, and changes radio channels if needed.
	Interval, in seconds, at which RF Auto-Tuning decides whether to change
Tune Power Interval	the power level on radios in a radio profile. At the end of each interval, MSS
	processes the results of the RF scans performed during the previous interval,
	and changes radio power levels if needed.
	Number of seconds a	radio waits	before	increasing or	decreasing
	its power by 1 dBm	in response	to a	power change	from RF
Power ramp interval	Auto-Tuning. After each power ramp interval, the radio increases or decreases
	the power by another 1 dB until the radio reaches the power level selected by
	RF Auto-Tuning.
Channel Holddown	Minimum number of seconds a radio in a radio profile must remain at its current
	channel assignment before RF Auto-Tuning can change the channel.
Countermeasures	Indicates whether countermeasures are enabled.
Active-Scan	Indicates whether the active-scan mode of RF detection is enabled.
RFID enabled	Indicates whether AeroScout tag support is enabled.
WMM Powersave	Indicates whether U-APSD support is enabled.
	Indicates the Quality-of-Service setting for AP radio forwarding queues:
	• wmm—AP forwarding queues provide standard priority handling for WMM
QoS Mode	devices.
	• svp—AP forwarding queues are optimized for SpectraLink Voice Priority
	(SVP).
Service profiles	Service profiles mapped to this radio profile. Each service profile contains an
	SSID and encryption information for that SSID.

D-Link DWS-1008 CLI Manual 422