D-Link dws-1008 manual Link DWS-1008 CLI Manual 201, Attribute Description Valid Values

Defaults: None.

Access: Enabled.

Usage: To change the value of an attribute, enter set mac-user attr with the new value. To delete an attribute, use clear mac-user attr.

You can assign attributes to individual MAC users and to MAC user groups. If attributes are configured for a MAC user and also for the group the MAC user is in, the attributes assigned to the individual MAC user take precedence for that user. For example, if the start-date attribute configured for a MAC user is sooner than the start-date configured for the MAC user group the user is in, the MAC user’s network access can begin as soon as the user start-date. The MAC user does not need to wait for the MAC user group’s start date.

Attribute	Description	Valid Value(s)
		One of the following numbers that identifies an
		encryption algorithm:
		• 1—AES_CCM (Advanced Encryption
		Standard using Counter with CBC-MAC)
		• 2—Reserved
	Type of encryption required for access by	• 4—TKIP (Temporal Key Integrity Protocol)
	the client. Clients who attempt to use an	• 8—WEP_104 (the default) (Wired-
	unauthorized encryption method are rejected.	Equivalent Privacy protocol using 104 bits
encryption-type		of key strength)
	Note: Encryption-Type is a D-Link vendor-	• 16—WEP_40 (Wired-Equivalent Privacy
	specific attribute (VSA).The vendor ID is 14525,	protocol using 40 bits of key strength)
	and the vendor type is 3.	• 32—NONE (no encryption)
		• 64—Static WEP In addition to these
		values, you can specify a sum of them for
		a combination of allowed encryption types.
		For example, to specify WEP_104 and
		WEP_40, use 24.
		Date and time, in the following format:
	Date and time after which the user is no longer	YY/MM/DD-HH:MM Y
end-date		You can use end-date alone or with start-date.
	allowed to be on the network.	You also can use start-date, end-date, or both
		in conjunction with time-of-day.

D-Link DWS-1008 CLI Manual 201