D-Link dws-1008 manual Set web-portal, Syntax set web-portal enable disable

Defaults: None.

Access: Enabled.

Usage: To change the value of an attribute, enter set usergroup attr with the new value. To delete an attribute, use clear usergroup attr. To add a user to a group, user the command set user group.

You can assign attributes to individual users and to user groups. If attributes are configured for a user and also for the group the user is in, the attributes assigned to the individual user take precedence for that user. For example, if the start-date attribute configured for a user is sooner than the start-date configured for the user group the user is in, the user’s network access can begin as soon as the user start-date. The user does not need to wait for the user group’s start date.

Examples: The following command adds the user group cardiology to the local database and assigns all the group members to VLAN crimson:

DWS-1008# set usergroup cardiology attr vlan-name crimson success: change accepted.

See Also:

•clear usergroup

•clear usergroup attr

•show aaa

set web-portal

Globally enables or disables WebAAA on a DWS-1008 switch.

Syntax: set web-portal {enable disable}

enable Enables WebAAA on the switch.

disable Disables WebAAA on the switch.

Defaults: Enabled.

Access: Enabled.

Usage: This command disables or reenables support for WebAAA. However, WebAAA has additional configuration requirements.

Examples: To disable WebAAA, type the following command:

DWS-1008#set web-portal disable

success: change accepted.

See Also:

•clear authentication web

•set service-profile auth-fallthru

•set user

D-Link DWS-1008 CLI Manual 209