in Removes the security ACL from traffic coming into the switch.

out Removes the security ACL from traffic going out of the switch.

Defaults: None.

Access: Enabled.

Usage: To clear a security ACL map, type the name of the ACL with the VLAN, physical port or ports, virtual port tag, or Distributed AP and the direction of the packets to stop filtering. This command deletes the ACL mapping, but not the ACL.

Examples: To clear the mapping of security ACL acljoe from port 4 for incoming packets, type the following command:

DWS-1008# clear security acl map acljoe port 4 in clear mapping accepted

To clear all physical ports, virtual ports, and VLANs on a switch of the ACLs mapped for incoming and outgoing traffic, type the following command:

DWS-1008# clear security acl map all success: change accepted.

See Also:

clear security acl

set security acl map

show security acl map

commit security acl

Saves a security ACL, or all security ACLs, in the edit buffer to the running configuration and nonvolatile storage on the switch. Or, when used with the clear security acl command, commit security acl deletes a security ACL, or all security ACLs, from the running configuration and nonvolatile storage.

Syntax: commit security acl {acl-name all}

acl-name

Name of an existing security ACL to commit. ACL names must start with a

 

letter and are case-insensitive.

all

Commits all security ACLs in the edit buffer.

D-Link DWS-1008 CLI Manual

472

Page 475
Image 475
D-Link dws-1008 Commit security acl, Syntax commit security acl acl-name all, Commits all security ACLs in the edit buffer