D-Link DWS-1008 CLI Manual 166
show timezone
Shows the time offset for the real-time clock from UTC on a switch.
Syntax: show timezone
Defaults: None.
Access: All.
Examples: To display the offset from UTC, type the following command:
DWS-1008# show timezone
Timezone set to ‘pst’, offset from UTC is -8 hours
See Also:
• clear summertime
• clear timezone
• set summertime
• set timedate
• set timezone
• show summertime
• show timedate
telnet
Opens a Telnet client session with a remote device.
Syntax: telnet {ip-addr | hostname} [port port-num]
ip-addr IP address of the remote device.
hostname Hostname of the remote device.
port port-num TCP port number on which the TCP server on the remote device listens for
Telnet connections.
Defaults: MSS attempts to establish Telnet connections with TCP port 23 by default.
Access: Enabled.
Usage: To end a Telnet session from the remote device, press Ctrl+t or type exit in the management
session on the remote device. To end a client session from the local device, use the clear sessions
telnet client command.
If the configuration of the switch from which you enter the telnet command has an ACL that
denies Telnet client traffic, the ACL also denies access by the telnet command.