D-Link dws-1008 Set service-profile wpa-ie, Syntax set service-profile name wpa-ie enable disable

Examples: The following command configures a 5-byte WEP key for key index 1 on service profile sp2 to aabbccddee:

DWS-1008# set service-profile sp2 wep key-index 1 key aabbccddee success: change accepted.

See Also:

•set service-profile wep active-multicast-index

•set service-profile wep active-unicast-index

•show service-profile

set service-profile wpa-ie

Enables the WPA information element (IE) in wireless frames. The WPA IE advertises the WPA authentication methods and cipher suites supported by radios in the radio profile mapped to the service profile.

Syntax: set service-profile name wpa-ie {enable disable}

name Service profile name.

enable Enables the WPA IE.

disable Disables the WPA IE.

Defaults: The WPA IE is disabled by default.

Access: Enabled.

Usage: When the WPA IE is enabled, the default authentication method is 802.1X. There is no default cipher suite. You must enable the cipher suites you want the radios to support.

Examples: The following command enables the WPA IE in service profile sp2:

DWS-1008# set service-profile sp2 wpa-ie enable success: change accepted.

See Also:

•set service-profile auth-dot1x

•set service-profile cipher-tkip

•show service-profile

D-Link DWS-1008 CLI Manual 395