D-Link DWS-1008 CLI Manual 504The table below describes the fields in this display.
Field Description
Filter Name of the snoop filter.
Dap Distributed AP containing the radio to which the filter is mapped.
Radio Radio to which the filter is mapped.
Rx Match Number of packets received by the radio that match the filter.
Tx Match Number of packets sent by the radio that match the filter.
Dropped Number of packets that matched the filter but that were not copied to the observer due to
memory or network problems.
Stop-After
Filter state:
• running—enabled
• stopped—disabled
• number-of-packets—If the filter is running and the stop-after option was used to stop the filter,
this field displays the number of packets that still need to match before the filter is stopped.