Defaults: Proxy ARP is disabled by default.

Access: Enabled.

Usage: To further reduce broadcast traffic on a service profile, use the set service-profile no- broadcast command to disable DHCP and ARP request broadcasts.

Examples: The following command enables proxy ARP on service profile sp1:

DWS-1008# set service-profile sp1 proxy-arp enable success: change accepted.

See Also:

set service-profile dhcp-restrict

set service-profile no-broadcast

show service-profile

set service-profile psk-phrase

Configures a passphrase for preshared key (PSK) authentication to use for authenticating WPA clients, in a service profile. Radios use the PSK as a pairwise master key (PMK) to derive unique pairwise session keys for individual WPA clients.

Syntax: set service-profile name psk-phrase passphrase

name

Service profile name.

passphrase An ASCII string from 8 to 63 characters long. The string can contain blanks if

you use quotation marks at the beginning and end of the string.

Defaults: None.

Access: Enabled.

Usage: MSS converts the passphrase into a 256-bit binary number for system use and a raw hexadecimal key to store in the DWS-1008’s configuration. Neither the binary number nor the passphrase itself is ever displayed in the configuration.

To use PSK authentication, you must enable it and you also must enable the WPA IE.

D-Link DWS-1008 CLI Manual

373

Page 376
Image 376
D-Link dws-1008 manual Set service-profile psk-phrase, Defaults Proxy ARP is disabled by default