D-Link dws-1008 Set port, Syntax set port enable disable port-list Enable, Disable, Port-list

Access: Enabled.

Examples: The following command configures Distributed AP 1 for AP model MP-372 with serial-ID 0322199999:

DWS-1008# set dap 1 serial-id 0322199999 model mp-372success: change accepted.

The following command removes Distributed AP 1:

DWS-1008#clear dap 1

This will clear specified DAP devices. Would you like to continue? (y/n) [n]y

See Also:

•clear dap

•clear port type

•set port type ap

•set system countrycode

set port

Administratively disables or reenables a port.

Syntax: set port {enable disable} port-list

enable	Enables the specified ports.
disable	Disables the specified ports.
port-list	List of physical ports. MSS disables or reenables all the specified ports.

Defaults: All ports are enabled.

Access: Enabled.

Usage: A port that is administratively disabled cannot send or receive packets. This command does not affect the link state of the port.

Examples: The following command disables port 4:

DWS-1008# set port disable 4 success: set “disable” on port 4

D-Link DWS-1008 CLI Manual 43