clear dot1x bonded-period

Resets the Bonded Auth period to its default value.

Syntax: clear dot1x max-req

Defaults: The default bonded authentication period is 0 seconds.

Access: Enabled.

Examples: To reset the Bonded period to its default, type the following command:

DWS-1008# clear dot1x bonded-periodsuccess: change accepted

See Also:

set dot1x bonded-period

show dot1x

clear dot1x max-req

Resets to the default setting the number of Extensible Authentication Protocol (EAP) requests that the switch retransmits to a supplicant (client).

Syntax: clear dot1x max-req

Defaults: The default number is 20.

Access: Enabled.

Examples: To reset the number of 802.1X requests the switch can send to the default setting, type the following command:

DWS-1008# clear dot1x max-reqsuccess: change accepted

See Also:

set dot1x max-req

show dot1x

D-Link DWS-1008 CLI Manual

241

Page 244
Image 244
D-Link dws-1008 manual Clear dot1x bonded-period, Clear dot1x max-req, Syntax clear dot1x max-req