show snoop map

Shows the AP radios that are mapped to a specific snoop filter.

Syntax: show snoop map filter-name

filter-nameName of the snoop filter.

Defaults: None.

Access: Enabled.

Usage: To display the mappings for all snoop filters, use the show snoop command.

Examples: The following command shows the mapping for snoop filter snoop1:

DWS-1008#show snoop map snoop1 filter ‘snoop1’ mapping

Dap: 3 Radio: 2

See Also:

clear snoop map

set snoop map

show snoop

show snoop stats

Displays statistics for enabled snoop filters.

Examples: show snoop stats [filter-name[dap-num[radio {1 2}]]]

filter-name

Name of the snoop filter.

dap dap-num

Number of a Distributed AP to which the snoop filter is mapped.

radio 1

Radio 1 of the AP.

radio 2

Radio 2 of the AP. (This option does not apply to single-radio models.)

Defaults: None.

Access: Enabled.

Usage: The AP retains statistics for a snoop filter until the filter is changed or disabled. The AP then clears the statistics.

Examples: The following command shows statistics for snoop filter snoop1:

 

DWS-1008#show snoop stats snoop1

 

 

 

 

Filter

Dap

Radio Rx Match

Tx Match

Dropped

Stop-After

=====================================================

 

snoop1

3

1

96

4

0

stopped

 

 

 

 

 

 

 

 

D-Link DWS-1008 CLI Manual

 

 

 

 

 

503

Page 506
Image 506
D-Link dws-1008 manual Show snoop map, Show snoop stats, Syntax show snoop map filter-name