clear dot1x reauth-max

Resets the maximum number of reauthorization attempts to the default setting.

Syntax: clear dot1x reauth-max

Defaults: The default is 2 attempts.

Access: Enabled.

Examples: Type the following command to reset the maximum number of reauthorization attempts to the default:

DWS-1008# clear dot1x reauth-maxsuccess: change accepted

See Also:

set dot1x reauth-max

show dot1x

clear dot1x reauth-period

Resets the time period that must elapse before a reauthentication attempt, to the default time period.

Syntax: clear dot1x reauth-period

Defaults: The default is 3600 seconds (1hour).

Access: Enabled.

Examples: Type the following command to reset the default reauthentication time period:

DWS-1008# clear dot1x reauth-periodsuccess: change accepted

See Also:

set dot1x reauth-period

show dot1x

D-Link DWS-1008 CLI Manual

243

Page 246
Image 246
D-Link dws-1008 manual Clear dot1x reauth-max, Clear dot1x reauth-period, Syntax clear dot1x reauth-max