D-Link dws-1008 manual Port Type, State, Interface Type, Speed, Autonegotiation, PoE, Port Groups

Port Commands

Use port commands to configure and manage individual ports and load-sharing port groups. This chapter presents port commands alphabetically. Use the following table to locate commands in this chapter based on their use.

Port Type	set port type ap on page 51
	set dap on page 42
	set port type wired-auth on page 53
	clear dap on page 34
	clear port type on page 36
	show port status on page 58
Name	set port name on page 46
	clear port name on page 36
State	set port on page 43
	reset port on page 42
Interface Type	set port media-type on page 35
	clear port media-type on page 36
Speed	set port speed on page 49
Autonegotiation	set port negotiation on page 47
PoE	set port poe on page 48
	show port poe on page 57
SNMP	set port trap on page 50
Port Groups	set port-group on page 44
Port Mirroring	clear port-group on page 35
	set port mirror on page 46
Statistics	clear port mirror on page 35
	show port counters on page 58
	monitor port counters on page 38
	clear port counters on page 34

D-Link DWS-1008 CLI Manual 33