The table below describes the fields in this display.

Field

Description

ARP aging time

Number of seconds a dynamic entry can remain unused before MSS removes the entry

from the ARP table.

 

 

 

Host

IP address, hostname, or alias.

 

 

HW Address

MAC address mapped to the IP address, hostname, or alias.

 

 

VLAN

VLAN the entry is for.

 

 

 

Entry type:

 

DYNAMIC—Entry was learned from network traffic and ages out if unused for longer

 

than the ARP aging timeout.

Type

LOCAL—Entry for the switch MAC address. Each VLAN has one local entry for the

switch MAC address.

 

 

PERMANENT—Entry does not age out and remains in the configuration even following

 

a reboot.

 

STATIC—Entry does not age out but is removed after a reboot.

 

 

 

Entry state:

State

RESOLVING—MSS sent an ARP request for the entry and is waiting for the reply.

 

RESOLVED—Entry is resolved.

 

 

See Also:

set arp

set arp agingtime

show dhcp-client

Displays DHCP client information for all VLANs.

Syntax: show dhcp-client

Defaults: None.

Access: All.

Examples: The following command displays DHCP client information:

DWS-1008#show dhcp-client

Interface:

corpvlan(4)

Configuration Status:

Enabled

DHCP State:

IF_UP

Lease Allocation:

65535 seconds

Lease Remaining:

65532 seconds

IP Address:

10.3.1.110

Subnet Mask:

255.255.255.0

Default Gateway:

10.3.1.1

DHCP Server:

10.3.1.4

DNS Servers:

10.3.1.29

DNS Domain Name:

mycorp.com

D-Link DWS-1008 CLI Manual

153

Page 156
Image 156
D-Link dws-1008 manual Show dhcp-client