D-Link dws-1008 manual Set igmp mrsol, Show igmp mrouter

Disables multicast router solicitation.

VLAN name or number. If you do not specify a VLAN, multicast router solicitation is disabled or enabled on all VLANs.

Enables multicast router solicitation.

Defaults: By default, no ports are static multicast router ports.

Access: Enabled.

Usage: You cannot add AP access ports or wired authentication ports as static multicast ports. However, MSS can dynamically add these port types to the list of multicast ports based on multicast traffic.

Examples: The following command adds port 5 as a static multicast router port:

DWS-1008# set igmp mrouter port 5 enable success: change accepted.

The following command removes port 5 from the static multicast router port list:

DWS-1008# set igmp mrouter port 5 disable success: change accepted.

See Also:

• show igmp mrouter

set igmp mrsol

Enables or disables multicast router solicitation by a switch on one VLAN or all VLANs.

Syntax: set igmp mrsol {enable disable} [vlan vlan-id] enable

disable vlan vlan-id

Defaults: Multicast router solicitation is disabled on all VLANs by default.

Access: Enabled.

Examples: The following command enables multicast router solicitation on VLAN orange:

DWS-1008# set igmp mrsol enable vlan orange success: change accepted.

See Also:

• set igmp mrsol mrsi

D-Link DWS-1008 CLI Manual 453