D-Link dws-1008 Show igmp statistics, DWS-1008#show igmp receiver-table group 237.255.255.0/24

VLAN name or number. If you do not specify a VLAN, MSS displays IGMP statistics for all VLANs.

The following command lists all receivers for multicast groups 237.255.255.1 through 237.255.255.255, in all VLANs:

DWS-1008#show igmp receiver-table group 237.255.255.0/24

VLAN: red

SessionPort Receiver-IP Receiver-MAC TTL

---------------------------------------------------------------------------------------

237.255.255.2	2	10.10.20.19	00:02:04:06:09:0d	112
237.255.255.119	3	10.10.30.31	00:02:04:06:01:0b	112
VLAN: green
Session	Port	Receiver-IP	Receiver-MAC	TTL

---------------------------------------------------------------------------------------

237.255.255.17	11	10.10.40.41	00:02:06:08:02:0c	12
237.255.255.255	6	10.10.60.61	00:05:09:0c:0a:01	111

The table below describes the fields in this display.

Field	Description
VLAN	VLAN that contains the multicast receiver ports. Ports are listed separately for each VLAN.
Session	IP address of the multicast group being received.
Port	Physical port through which the switch can reach the receiver.
Receiver-IP	IP address of the receiver.
Receiver-MAC	MAC address of the receiver.
	Number of seconds before this entry ages out if the switch does not receive a group membership
TTL	message from the receiver. For static multicast receiver entries, the TTL value is undef. Static
	multicast receiver entries do not age out.

See Also:

• set igmp receiver

show igmp statistics

Displays IGMP statistics.

Syntax: show igmp statistics [vlan vlan-id] vlan vlan-id

Defaults: None.

Access: All.

D-Link DWS-1008 CLI Manual 466