Manuals / HP / Computer Equipment / Desktops

HP 700-000t, 700-047c, 700-030, 700-019, 700-010xt, h8-1569, h8-1540t, h8-1549, h8-1559, h8-1520z manual

Models: 700-406 700-410 h8-1418 700-074 h8-1420t h8-1540t 700-339 700-060 700-327c h8-1410 700-300z

1 25

Download 25 pages 47.7 Kb

Page 1

Image 1

Page 1

Image 1

HP 700-000t, 700-047c, 700-030, 700-019, 700-010xt, h8-1569, h8-1540t, h8-1549, h8-1559, h8-1520z, h8-1520t, h8-1503, h8-1513c manual

Contents

Page The information contained herein is subject to change without notice Copyright 2011 Hewlett-Packard Development Company, L.PPart Number Version HP Elite 7300 MT HP Pavilion HPE h8-1000 Series PC Features may vary by modelRemoving and Replacing a Hard Disk Drive on page Removing and Replacing a CD/DVD Drive on pageRemoving the hard disk drive Removing and Replacing a Hard Disk DriveBefore you begin Tools NeededThe inside of the computer is exposed 7. Open the front bezel, and then remove it from the computer6. Lift the three tabs on the front bezel to release it 8. Lay the computer on a flat surfaceUpgrading and Servicing Guide Features may vary by modelInstalling a new hard disk drive Features may vary by model 3. Reattach the cables to the bottom end of the hard disk driveUpgrading and Servicing Guide 9. Place the computer in an upright position 8. Insert the two screws, securing the retaining bar in placeFeatures may vary by model Removing and Replacing a Hard Disk DriveFeatures may vary by model 14. Press the power button to turn on the computerUpgrading and Servicing Guide Removing the CD/DVD drive Removing and Replacing a CD/DVD Drive10 - 15 minutes Before you beginThe inside of the computer is exposed Features may vary by model6. Lift the three tabs on the front bezel to release it 7. Open the front bezel, and then remove it from the computerInstalling a new CD/DVD drive 5. Connect the cables to the back of the CD/DVD drive 3. Slide the CD/DVD drive all the way into the slotFeatures may vary by model Upgrading and Servicing GuideFeatures may vary by model 10. Press the power button to turn on the computerRemoving and Replacing a CD/DVD Drive Removing the memory Upgrading or Replacing MemoryMemory Compatibility Before you beginLocate the memory inside the computer Installing a new memory card Troubleshooting Removing the add-in card Upgrading or Replacing an Add-in CardBefore you begin Tools Needed7. Remove the two screws holding the retaining bar in place 6. Lay the computer on a flat surface10. Remove the screw that secures the bracket to the computer Upgrading or Replacing an Add-in CardCarefully lift the add-in card out by the edges 11. Remove the bracket from the back of the computerFeatures may vary by model Upgrading and Servicing GuideInstalling a new add-in card 5. Reattach the screw holding the bracket in place 7. Insert the two screws, securing the retaining bar in place8. Place the computer in an upright position Features may vary by modelFeatures may vary by model 12. Press the power button to turn on the computerUpgrading or Replacing an Add-in Card