Sanyo VPC-C1 Checking the Remaining Card Memory, Set the main switch to REC, Turn on the power

CHECKING THE REMAINING CARD MEMORY

You can check how many images can be captured and how much recording time is available on the card. For a table showing the maximum number of images and recording time for specific cards, please see “Possible No. of Images/Possible Shooting Time/Possible Recording Time” on page 167.

Checking the remaining number of images and video recording time

1 Set the main switch to REC, and	Remaining number of images
			Remaining video
turn on the power (page 37).
			recording time
e The remaining number of images
		6	00:09
appears in the upper left of the
LCD monitor.

eThe remaining video recording time appears in the upper right of the LCD monitor.

e The remaining number of images
and video recording time will differ
depending on the resolution and
compression settings.	<Still image shooting mode>
e When the remaining number of
images or the remaining video
recording time is “0”, you cannot
capture any more images. To
capture more images, either install
a new card, or save the images to
a computer (page 129) and then
erase them (page 75) from the

card.

eWhen the remaining number of images or the remaining video recording time is “0”, it may be possible to capture a few more images by setting a lower resolution setting (pages 55, 56), or selecting a different compression setting.

English 124