Sanyo VPC-C1 Select the image to play back, Resetting the remote control code to RC Code

DOCKING STATION

<Resetting the remote control code to “RC CODE 1”>

1 Aim the infrared emitter at the remote control sensor on the docking station.

2 Hold down the CH button and press the [J] button for about 3 seconds.

Select the image to play back.

1 Connect the docking station to a TV, and set the camera in the docking station.

2 Press the CAMERA/CHARGE button to turn on the camera lamp.

CAMERA/CHARGE button

Camera indicator

3 Set the TV input switch to VIDEO input.

eIf the camera is set to the playback mode, the Playback Screen appears on the TV monitor. The playback method is the same as when viewing images on the LCD monitor.

137English