Sanyo VPC-C1 instruction manual Troubleshooting, View

TROUBLESHOOTING

				Refer-
	Problem	Cause	Action	ence
				page
	When zooming	The optical zoom	Not a malfunction.
	in or out, the	has moved to the	Release the zoom
	zoom	maximum	switch, and press it	61
	movement	magnification	again.
Shoot-
	stops	position.
ing
	momentarily.
	There is noise	The ISO sensitivity	Set the ISO
	in the captured	setting is too high.	sensitivity to a lower	84
	image.		setting.
LCD	No playback	The main switch is	Set the main switch	64
monitor	image appears.	not set to PLAY.	to PLAY.
	The image is	The flash was	Hold the camera
	too dark.	blocked by a finger	correctly, and make	44
		or other object.	sure the flash is not
			obstructed.
		The subject was too	Capture the image in
		far away.	the range of	165
			operation of the flash.
		The subject was lit	Use the forced flash	60
		from behind.	mode.
View-			Use the exposure	86
			correction function.
ing
		There is not enough	Adjust the ISO
images				84
		light.	sensitivity setting.
	The video clip	The video clip was	Set the flicker-
	picture is	filmed under	reduction setting to	83
	flickering.	fluorescent lighting.	on.
	The image is	The forced flash	Select a different	60
	too bright.	mode is selected.	flash mode.
		The subject was too	Use the exposure	86
		bright.	correction function.
		The ISO sensitivity	Set the ISO	84
		setting is incorrect.	sensitivity to t.

159English