DANGER

iCautions when plugging in

eSecurely plug the power cord all the way into the power outlet. If the docking station or AC adapter/charger is used with the power cord not fully plugged in, heat may be generated and cause a fire.

eDo not use if the power cord is damaged or cannot be correctly plugged into the power outlet. Using in this condition may cause a fire or electric shock.

eDo not allow dust, etc., to build up on the power cord or power outlet. A build-up of dust may cause a short circuit or generate heat and cause a fire.

eWhen unplugging the power cord, be sure to hold the plug part and slowly pull it out of the power outlet. Pulling the cord portion may damage the power cord and cause a fire or electric shock.

iDo not pull on the power cord to unplug it

eDo not leave the power cord plugged into the power outlet while the other end is not plugged into the docking station or AC adapter/charger. The loose end can cause electrocution if touched with wet hands or if handled by children.

eUse only the supplied power cord. If a different power cord is used, it may be rated for a different current load, and that may cause a fire.

eThe supplied power cord is for exclusive use with the devices supplied with your camera. Do not use it with other devices, as doing so may cause a fire or electric shock.

eDo not use a bundled power cord, as the heat generated may cause a fire.

eWhen using an extension cord, make sure that the total wattage of the connected devices does not exceed the rated value of the extension cord. If the power load exceeds the rated value, it may cause a fire.

English 12

Page 15
Image 15
Sanyo VPC-C1 instruction manual Do not pull on the power cord to unplug it