Kodak 2100 manual Status lights, Wi-Fi connectivity LED, Power light What it means

Troubleshooting

Status lights

There are three status lights on the printer: the power status light (on the on/off button) indicates power, the Wi-Fi status light indicates Wi-Fi status, and the attention light blinks when an error occurs.

Power light

Power light	What it means
Off	• The printer is turned off.
	– Press the power button to turn on power.
	• The printer does not have power.
	– Make sure that the power cord is plugged into the
	back of the printer and into an electrical outlet, and
	that the electrical outlet has power.
Blinking	• The printer is busy.
	– Wait for the printer to finish the task.
On	The printer is ready.

Wi-Fi connectivity LED

Wi-Fi connectivity LED	What it means
Off	The Wi-Fi radio is either turned off or is turned on but not
	connected to a wireless network.
Blinks continuously	The Wi-Fi radio is turned on, and the printer is searching for
	available wireless networks within range.
Blinks intermittently	The Wi-Fi radio is turned on and the printer cannot find any
	available wireless networks within range, or the Wi-Fi radio
	connection has been interrupted, or is too weak to send
	signals to and from the printer.
	To find and connect to an available wireless network within
	range, press OK, turn the Wi-Fi radio off, and run the Wi-Fi
	Setup Wizard (see Connecting to a wireless network,
	page 15).
On	The Wi-Fi radio is turned on, and there is a working
	connection between the printer and a wireless network.

92 www.kodak.com/go/aiosupport